Advantages and disadvantages of hot bending glass process flow



Glass is a commonly used building material in our decoration process, whether it is used for partition treatment or ordinary decoration, and glass

It can visually magnify the space of a house, making people feel very bright. Although we often come into contact with them, we are not satisfied with these

There is not much understanding of the types and characteristics of glass, especially regarding the common process flow and advantages and disadvantages of hot bending glass nowadays

Today, let me share some relevant knowledge about hot bending glass with you， Glass product    .

1、 Hot bending glass process flow



1. Before conducting formal processing, it is necessary to conduct a comprehensive inspection of the glass, but ensure that there are no cracks or edges on the glass

For example, if there is wear on the edges and corners of the glass, it must be repaired. If there is a large area of missing parts, it must be replaced

Replace; No bumps are allowed at the interface.

2. The pressure roller used during glass molding must be borrowed because it cannot achieve the required curvature and spherical surface solely by relying on gravity.



3. When using hollow molds, the middle of the glass must be supported, because before entering, if the glass is not supported

In this case, it is easy to cause glass to break in the furnace, causing unnecessary economic losses,

4. When forming glass, if the radius of some glass is relatively large, it is important to remember that external forces are needed to form a bonding mold. Of course

The determining factor for forming is still temperature.

2、 Advantages and disadvantages of hot bending glass

The characteristic of hot bent glass is that it needs to be formed in a heat softening mold and then annealed to produce curved glass; In some larger areas

In decoration, the frequency of use is increasing because its advantages are very prominent. Generally, hot bent glass needs to be pre ordered,

There is basically no stock available, and the advantages and disadvantages of hot bending glass are mainly manifested in the following aspects:,



Advantages of hot bent glass:

1. Aesthetics:

The curved shape of hot bent glass has no connecting ports in the middle, and the visual lines are beautiful, achieving an overall harmonious effect

noodles.

2. Specificity:

According to the different needs of customers, hot bent glass can be made into various shapes and sizes

Disadvantages of hot bent glass:

1. Poor permeability

The common drawback of most glass is that it is relatively easy to be scratched, and another drawback of hot bent glass is its permeability

Not particularly good.

2. Poor viewing effect

The viewing effect is not good, and the hardness is lower than that of ordinary glass materials. Prolonged soaking in water may cause chemical reactions.

The above is the hot bending glass production process and related knowledge on the advantages and disadvantages of hot bending glass shared by the editor of Qizhuang Network. We hope to have a better understanding of

You have been helpful. If you want to learn more about hot bending glass