Blog Details
- Home
- Blog Details
Unidirectional perspective glass
Unidirectional perspective glass
Unidirectional perspective glass (also known as atomic mirror, single-sided mirror, single-sided mirror, double-sided mirror, unidirectional glass) is a type of glass that has a high reflectance to visible light， Glass product .
brief introduction
When using unidirectional perspective glass, the reflective surface (mirror surface) must be facing the light or facing the outdoor side. When the outside is brighter than the inside, unidirectional perspective glass is similar to a regular mirror. The indoor scenery cannot be seen outdoors, but it can be clearly seen indoors. When the outdoors is darker than indoors, indoor scenery can be seen outdoors, and indoor scenery can also be seen indoors, with its clarity depending on the intensity of outdoor lighting.
Product installation steps
The installation of one-way perspective glass should follow the following steps:
1. Unidirectional perspective glass is divided into two sides: positive and negative. The front is a glass mirror, which is used to reflect light. When installing, the front should face the monitored room (i.e., the space to be observed, such as the space where the suspect is located); Orient the opposite side towards the location of the judge (i.e. monitoring room).
2. The lighting intensity of the monitored room should ensure sufficient brightness. The brighter and stronger the light in the monitored room, the more obvious the unidirectional perspective effect of the glass.
3. In order to achieve the best unidirectional perspective performance of the glass, ceiling lights are not installed in the monitoring room in principle, and other light sources are not allowed to exist. If there are windows next to the monitoring room, opaque curtains, such as sealed curtains used in hotels, must be installed. When using, it is recommended to turn off all lights in the monitoring room.
4. If it is necessary to use lighting in the monitoring room, it is recommended to use point shaped lights, such as writing desk lamps (with opaque lampshades), to reduce the lighting range, and to control the lighting ratio between the monitoring room and the monitored room at 1:3 or a lower ratio to ensure that the one-way visibility performance of the glass is intact. Attention: The light should not be installed directly behind the glass to prevent personnel in the monitoring room from reflecting the image on the surface of the glass.
5. To enhance the overall reflectivity of unidirectional glass, it is recommended to install spotlights above or below the glass mirror surface to enhance the overall reflectivity of the glass mirror surface and enhance the unidirectional perspective effect of the glass.
6. The actual distance between the monitored personnel and the one-way perspective glass should be maintained at least 1 meter.
7. Unidirectional perspective glass is a special type of glass, and attention must be paid to protecting the mirror surface during installation. Once the mirror surface is damaged, it cannot be repaired.
application
(1) Widely used in prisons, police stations, interrogation rooms, higher people's courts, interrogation rooms of public prosecution and legal institutions, psychiatric hospitals, research institutes of university research institutions, school conference rooms, kindergartens, large conference rooms, offices, etc. With a certain lighting effect, it can achieve a one-way perspective effect that cannot be seen from the outside, but can be clearly seen from the inside. After special treatment by the research department, this product also has explosion-proof and soundproof effects.
(2) To enhance the overall reflectivity of unidirectional perspective glass, it is recommended to install three to four 100W-150W spotlights (white, i.e. colorless) evenly above the glass, with a 45 degree angle towards the middle of the glass mirror to enhance the overall reflectivity of the glass mirror and enhance the unidirectional perspective effect of the glass.
matters needing attention
Unidirectional perspective glass is a special type of glass, and attention must be paid to protecting the mirror surface during installation. Once the mirror surface is damaged, it cannot be repaired. The new type of safe one-way perspective glass has overcome this disadvantage and has the characteristics of scratch resistance and corrosion resistance.
Unidirectional perspective glass (also known as atomic mirror, single-sided mirror, single-sided mirror, double-sided mirror, unidirectional glass) is a type of glass that has a high reflectance to visible light， Glass product .
brief introduction
When using unidirectional perspective glass, the reflective surface (mirror surface) must be facing the light or facing the outdoor side. When the outside is brighter than the inside, unidirectional perspective glass is similar to a regular mirror. The indoor scenery cannot be seen outdoors, but it can be clearly seen indoors. When the outdoors is darker than indoors, indoor scenery can be seen outdoors, and indoor scenery can also be seen indoors, with its clarity depending on the intensity of outdoor lighting.
Product installation steps
The installation of one-way perspective glass should follow the following steps:
1. Unidirectional perspective glass is divided into two sides: positive and negative. The front is a glass mirror, which is used to reflect light. When installing, the front should face the monitored room (i.e., the space to be observed, such as the space where the suspect is located); Orient the opposite side towards the location of the judge (i.e. monitoring room).
2. The lighting intensity of the monitored room should ensure sufficient brightness. The brighter and stronger the light in the monitored room, the more obvious the unidirectional perspective effect of the glass.
3. In order to achieve the best unidirectional perspective performance of the glass, ceiling lights are not installed in the monitoring room in principle, and other light sources are not allowed to exist. If there are windows next to the monitoring room, opaque curtains, such as sealed curtains used in hotels, must be installed. When using, it is recommended to turn off all lights in the monitoring room.
4. If it is necessary to use lighting in the monitoring room, it is recommended to use point shaped lights, such as writing desk lamps (with opaque lampshades), to reduce the lighting range, and to control the lighting ratio between the monitoring room and the monitored room at 1:3 or a lower ratio to ensure that the one-way visibility performance of the glass is intact. Attention: The light should not be installed directly behind the glass to prevent personnel in the monitoring room from reflecting the image on the surface of the glass.
5. To enhance the overall reflectivity of unidirectional glass, it is recommended to install spotlights above or below the glass mirror surface to enhance the overall reflectivity of the glass mirror surface and enhance the unidirectional perspective effect of the glass.
6. The actual distance between the monitored personnel and the one-way perspective glass should be maintained at least 1 meter.
7. Unidirectional perspective glass is a special type of glass, and attention must be paid to protecting the mirror surface during installation. Once the mirror surface is damaged, it cannot be repaired.
application
(1) Widely used in prisons, police stations, interrogation rooms, higher people's courts, interrogation rooms of public prosecution and legal institutions, psychiatric hospitals, research institutes of university research institutions, school conference rooms, kindergartens, large conference rooms, offices, etc. With a certain lighting effect, it can achieve a one-way perspective effect that cannot be seen from the outside, but can be clearly seen from the inside. After special treatment by the research department, this product also has explosion-proof and soundproof effects.
(2) To enhance the overall reflectivity of unidirectional perspective glass, it is recommended to install three to four 100W-150W spotlights (white, i.e. colorless) evenly above the glass, with a 45 degree angle towards the middle of the glass mirror to enhance the overall reflectivity of the glass mirror and enhance the unidirectional perspective effect of the glass.
matters needing attention
Unidirectional perspective glass is a special type of glass, and attention must be paid to protecting the mirror surface during installation. Once the mirror surface is damaged, it cannot be repaired. The new type of safe one-way perspective glass has overcome this disadvantage and has the characteristics of scratch resistance and corrosion resistance.
Leave a comment