Blog Details
- Home
- Blog Details
Glass bottle production line process and equipment introduction
What is the glass bottle production line,glasscookware? Changes in consumer trends keep pace with the times, and technology develops with each passing day. Manufacturing is not far behind. After seven or eight years of use, national standards or industry standards should also be improved and revised accordingly, so as to adapt to the development trend and add some necessary content. Too many requirements and too many technical indicators increase useless manufacturing costs and cause waste of resources, which should also be included in the revision. National standards or industry standards must be made more authoritative, representative and applicable. In the production process of manual machine tools, the deviation or deficiency of the mold is not real.
The uniformity of the bottle mouth will vary greatly, but due to the shape of the individual bottle mouth, manual operation is more flexible than the assembly line, so as to achieve the product effect that the assembly line cannot achieve. Blowout time and mold opening and closing times affect bottle cooling and mold closing lines. Handmade machine molds are mostly opened with a handle. Assembly lines are different. Mould vents and opening and closing times are very precise. It has little effect on product styling, and the product's closed lines are also small. Although the glass glaze used in the printed glass bottle pattern has been integrated with the glass, its inherent glass characteristics also limit its use to 7 times, and excessive reuse will bring adverse consequences.
The decal glass bottle can only be used once and the pattern is incomplete. It also depends on the inherent acid and alkali resistance and erosion resistance of the decal material after high temperature curing. Compared to new wine in old bottles, glass bottle makers are ahead of beer and beverage makers in their industry. Printed glass bottles, lightweight or disposable glass bottles are the first choice for product packaging. Although the production cost is increased, it is of great benefit to the improvement of the product grade.
The uniformity of the bottle mouth will vary greatly, but due to the shape of the individual bottle mouth, manual operation is more flexible than the assembly line, so as to achieve the product effect that the assembly line cannot achieve. Blowout time and mold opening and closing times affect bottle cooling and mold closing lines. Handmade machine molds are mostly opened with a handle. Assembly lines are different. Mould vents and opening and closing times are very precise. It has little effect on product styling, and the product's closed lines are also small. Although the glass glaze used in the printed glass bottle pattern has been integrated with the glass, its inherent glass characteristics also limit its use to 7 times, and excessive reuse will bring adverse consequences.
The decal glass bottle can only be used once and the pattern is incomplete. It also depends on the inherent acid and alkali resistance and erosion resistance of the decal material after high temperature curing. Compared to new wine in old bottles, glass bottle makers are ahead of beer and beverage makers in their industry. Printed glass bottles, lightweight or disposable glass bottles are the first choice for product packaging. Although the production cost is increased, it is of great benefit to the improvement of the product grade.
Leave a comment