Blog

How to measure the size of double glass? Introduce the following effective methods

admin 2022-03-01 14:20:1703 Comments
A cup is a frequently used drinking tool in life, and a double-layer glass is one of the cups that meet the health drinking standards for workers. Therefore, when many people buy a double-layer glass, not only the appearance of the cup, but also the appearance of the cup should be considered. It will be more related to its size. The following Yongkang glass cup manufacturers will introduce you to the method of measuring the size of double-layer glass cups:

double glass

1. Use a thickness caliper to measure 10mm below the edge of the mouth.

2. The outer diameter of the bottom of the double-layer glass cup is measured with a vernier caliper, and the measurement position is based on the average diameter of the bottom plane of the cup.

3. The outer diameter of the mouth is measured with a vernier caliper, and the measurement position is based on the average diameter of the cup mouth plane.

4. The height of the glass cup is measured with a vernier caliper, and the measurement position is based on the vertical distance from the mouth of the cup to the bottom of the cup.

5. Measure the bottom thickness with a vernier p ruler, glasscookware,and vertically extend the depth gauge of the vernier caliper into the inside of the cup to the center of the bottom. Record the reading, and then use the vernier caliper to measure the height of the cup body and record the reading. The difference between the two readings minus the height of the recess at the bottom is the thickness of the bottom of the cup.

6. When the height is low and skewed, measure with a 900 square. Place the sample cup to be tested on a horizontal plane, place one side of the square ruler perpendicular to the plane, and be on the same plane as the central axis of the sample cup, rotate the sample cup, and use a straight ruler to measure the maximum value from the mouth of the cup to the other side of the corner. The difference between the two values ​​of the smaller value is the low skewness of the cup height.

7. Quantity measurement: measure a few milliliters of water at room temperature that is larger than the capacity of the sample cup to be tested with the measuring cylinder, record the reading, then fill the sample cup with water, and record the reading of the remaining water in the measuring cylinder. The difference between the two readings is the For the capacity of the cup, this is related to the size, so it should be well grasped.

Since many glasses are irregular, when measuring, you might as well try the seven methods introduced above, which may be able to help you. The editor recommends that in order to avoid measurement errors, you should measure several times and take the average value. During the measurement process, you should pay attention to handling it with care, and do not use too much force or accidentally damage the cup.

Leave a comment

Do you have any Projects ?

Whether you want to work with us or are interested in learning more about what we do,we’d love to hear from you.